Sensor cleaning has never been easier and safer !

• Safe & Easy cleaning of ALL sensor types
• Contact-free, vacuum cleaning action
• Removes loose particles, dust, fluff & abrasions
• Cleans mirror box, lens barrel etc
• "Wet & Dry" System removes stains & welded-on dust
• Economical
• "Green", environmentally friendly products

The Green-Clean Sensor Cleaning System is a brand new product developed by professionals for professional cleaning of all types of digital cameras. And not just the sensor, but all critical areas including the mirror box, lens barrels etc. This contact-free cleaning system works on a vacuum principle allowing the user to gently remove dust, fluff and friction particles from the sensor and camera housing.

Using compressed air, the "Mini Vac" creates a vacuum action and gently "hoovers" dust off the sensor, mirror box, lens barrel and other critical areas of the camera & lens. ONLY if there are any kind of stains, grease or welded-on dust particles left on the sensor need the "Wet & Dry" sweeper system (included in kit SC-4000) be used. The “Wet Sweeper” is pre-soaked with the correct dosage of cleansing fluid (non-toxic, non-flammable) to dissolve dirt, which is then lifted off by the “Wet Sweeper” with it's pre-treated textile, leaving a clean, streak-free sensor surface!

It uses materials of the highest possible quality, which are guaranteed to be "Green", i.e. environmentally friendly and in full compliance with EU regulations. The Green Clean principle is also the most economical cleaning system compared to others currently on the market.

The Green Clean Mini Vac uses compressed air from an aerosol can to create a strong and consistent vacuum effect, allowing the user to gently remove all types of loose particles, dust and abrasions from the sensor surface.

The MINI VAC is connected to the PICK UP, an interchangeable, trumpet shaped tube at the end of a 28 cm long flexible tube. The Pick Up is made from non-conductive and abrasion-free material (this plastic does not contain softeners), which is non-damaging to the sensor surface in case of contact! The dirt can then be seen in the clear collecting dish of the Mini Vac.